|
|
Documentation of Braking Traces Using a Camera
Kopecký, Štěpán ; Bradáč, Albert (referee) ; Bilík, Martin (advisor)
The diploma thesis describes the measurement and evaluation of braking traces in cars equipped by system ABS. The result of the work should contribute to improving the quality of photodocumentation of braking traces. To creating a procedure to eliminate as much as possible the loss of information during tracking documentation.
|
|
| |
|
|
Use of PhotoModeler program in forensic engineering practice
Zdražilová, Alena ; Klika, Pavel (referee) ; Daňhel, Petr (advisor)
The main task of this thesis is to find out dimensions of family house from photos and after that use this dimensions to create a 3D model. Another task is to create and then test optimal procedure of taking photographs of house for the purpose of work in PhotoModeler software and subsequent processing in Autocad. The result is a model that serves for creation of sections and taking measurements necessary for valuations of a family house. The optimum process should be a compromise of the simplest and the most accurate method of creating 3D models.
|
|
|
3D Photo Slideshow Using OpenGL
Dokoupil, Martin ; Fapšo, Michal (referee) ; Seeman, Michal (advisor)
This document describes implementation of photo slideshow editor. This editor can be used to create dynamic sequences from taken photos. Image taken by camera is projected onto three-dimensional sphere and drawn to screen. Then it is posible to rotate and zoom camera over image. Visual output of this editor makes moving over image more real. If panoramic image is used, user is able to free look around. This document describes method which can translate two-dimensional coordinates to three-dimensional space. Shows how to use transformations for moving camera and methods to implement camera zoom. Contains description of user interface and also mentions extensions that were implemented in editor.
|
|
|
Camera Positioning Device
Berčík, Vojtěch ; Toman, Marek (referee) ; Červinka, Dalibor (advisor)
This master’s thesis deals with the design of a drive for a camera positioning device that could be used for shooting videos and timelapses. The optimal drive and power supply as well as the steering program based on the Arduino platform program are developed. The construction prototype adapted for printing at 3D printers is also designed. The whole system is then produced and tested.
|
|
|
Color Correction for 3D scanner and 3D printer
Kratochvíla, Michael ; Dorazil, Jan (referee) ; Říha, Kamil (advisor)
This thesis deals with color correction of a chain that starts with the 3D Artec MHT scanner, and ends with the 3D printers (CJP – Color Jet Printing technology). In principle, it is necessary to control the color interpretation of the entire chain from the scanning of real models to the 3D print model. With color properties and their color shade, including color textures. The principle of model surface scanning using a 3D scanner is in the same principle as photo camera which scans using a conventional CMOS chip. For this reason, color palettes were scanned using the photo camera and the resulting digital data were analyzed by the Darktable software. This analysis consisted of comparing the scanned color shades of the surface with the spectrofotometer measured data. The main goal of this method was to achieve color precision in the digital data during their acquirement, adjustment and interpretation. Then the same principle was applied to the data acquired by the 3D scanner to create an ICC profile of the 3D scanner. Because the 3D printer (CJP – Color Jet Printing) uses the same principle as the 2D printer, the 2D printing device calibration principle was used again to calibrate it. There have been defined procedures that adjust the color shade to the spectrophotometrically correct shades of the resulting print on a 3D printer. Color swatches were also printed for print quality verification. It has been found that with photo camera, which was used for objective measurement in the L*a*b* coordinates of independent space, any color setting and their adjustment is very sensitive to even small imprecisions. It has been found that it is not easy to obtain accurate colors within the Detla E
|
|
| |
|
|
Canon A70 Digital Cameras Simulator and Trainer
Řepa, Daniel ; Drozdová, Martina (referee) ; Kunovský, Jiří (advisor)
This Bachelor's Thesis details the creation of a simulator, a training application and a manual for the Canon A70 camera. The text describes the application analysis, choice of technology and implementation of the simulator. The conclusion compares this Bachelor's Thesis with others and contains the results of a public inquiry about how well is the application received by users.
|
|
|
Distance measurement using sensors of mobile phone
Hubr, Ivo ; Endrle, Pavel (referee) ; Lattenberg, Ivo (advisor)
Distance and the associated parameters can be measured by specific sensors mobile device. Introduction The work focuses on the description of the sensors and the effects on their accuracy. To measure the distance, there is a number of good practices, which were described and demonstrated the application implemented source code for the Android platform. The project works with a total of three sensors, namely accelerometer, magnetometer and camera. The main objective of this work is the definition and application of methods for measuring distance using the appropriate sensors.
|
|
|
Use of photogrammetry expertise in the field of construction and real estate valuation
Slabotinský, Filip ; Klika, Pavel (referee) ; Daňhel, Petr (advisor)
The task of this diploma thesis is to design and test the optimal procedures for taking photos to build a 3D model of a civic building using the programme PHOTOMODELER. Then to determine the specific dimensions of the civic building and compare them with the dimensions received with the help of the basic method of measurement in common building practice, i.e. the method of cross directions (using a tape or a telescopic measuring rod) and the geodetic method of measurement. After that to evaluate these measurements and make the conclusion concerning the accuracy or inaccuracy of measurements received with the help of the 3D model of the compiled programme PHOTOMODELER.
|
guest ::
